Match the numbered contacts to the table below each drawing. Check the stated plug/socket view and keyed edge first: the mating face and wiring side are mirrored. Drawings are schematic, not to scale.
Full-size Type A, using traditional TMDS signal names. Mini and Micro HDMI have different numbering. FRL and eARC modes reuse contacts; this table is the baseline connection reference.
Full-size source-side connector. Mini DisplayPort has different pin assignments. CONFIG contacts are grounded in the cited source configuration. Standard passive DP-to-DP cables do not carry DP_PWR end-to-end.
DVI-I includes analog contacts C1-C5. DVI-D single link omits the analog contacts and does not use pin 8. This entry does not describe dual-link's additional data pairs.
15-pin high-density VGA. DDC support and legacy ID assignments vary by generation. Match molded pin numbers and the manufacturer mating-face drawing; the rear/solder view is mirrored.
